- Fabric-wrapped hard shell case gives a fabulous tailored look
- Original fabric patterns on a form-fit two-piece hard shell
- Soft-touch matte coating on case shell
- Access to all buttons, controls and 30 pin connector while in the case
Place your iPad into the back half of the case, making sure you have it set the right way (check the headphone plug and 30-pin connector for alignment with the cutouts). Place the front of the case on top, again, checking for alignment to make sure you have it the right way. Start at one corner, and snap the two pieces together, going all the way around the edges till the two pieces are firmly seated together on all sides. To remove the Fitted iPad case, start at the button cutout on the side, and gently pull the top half away from the bottom half. Working your way around to the corners, un-snap all the way around until the two pieces are completely separated.
