CHARGING MADE SIMPLE
With drop-and-go charging for up to four devices at once, myGrid™ takes the frustration - and the wires-out of charging your mobile devices. Choose either a Power Clip™ or Power Sleeve™ for your handheld device to charge it on myGrid™. Power Sleeves exist for the iPhone, iPod Touch, BlackBerry Pearl™ and BlackBerry Curve™;
Product Types
| |
| Simple drop and go charging |
Charge up to 4 devices at once |
| Lightweight and ultra-slim design |
Automatic "turn-off" mechanism stops charging when each device is fully charged (i.e. they will not overcharge) |
| Safe to touch and even safe to liquid spillages |
Powered by an ENERGY STAR qualified adaptor (see www.energystar.gov) |
myGrid™ pad requres a wire, all mobile devices being charged do not.
TECHNICAL SPECIFICATIONS
Max Number of Devices: 4 (15W max)
Dimensions: 6.75” W x 8.5” L x 0.75” H
Power input: 100 – 240 VAC, 0.4 Amps, 50 – 60 Hz
Power output: 15VDC; 1A
Weight: 4.0 oz.
Certifications: FCC, ETL
OPERATION
Set Up:
1. Place myGrid™ in a flat location.
2. Plug the AC adapter into the wall outlet.
3. Insert the DC power plug firmly into myGrid™.
Charging your myGrid™-enabled devices:
• Once myGrid™ is powered on, the indicator light will turn on while the system status is checked. If the system is functioning properly and there is no fault detected (i.e. keys, metal object, or a hand placed on the charge pad) then the indicator light will turn off in 3-5 seconds.
You are now ready to charge your myGrid™-enabled devices.
• Simply place myGrid™-enabled devices on myGrid™ with the contacts facing down. The indicator light will light up to show you that your device is receiving power. If a fault is detected, the indicator light will (1) not appear upon initial power up, or (2) turn off during operation.
• When not in use, myGrid™ will be in Sleep Mode. In this mode, the charging surface and the indicator light both turn off.
• myGrid™ can charge up to four myGrid™-enabled devices (mobile phones, music players, etc.,) at once. Make sure that the devices are sitting flat on and making firm contact with myGrid™.
• Make sure to place only myGrid™-enabled devices on the pad. Devices that are not compliant will not receive power. (Non-compliant devices will not be damaged but will also not receive power from myGrid™.)
MAINTENANCE AND USAGE
• The AC wall outlet should be located near myGrid™ and should be easily accessible.
• myGrid™ can charge up to four myGrid™-enabled devices (mobile phones, music players, etc.,) at once. However, certain devices or combinations of devices may require more power than is available. When this happens, the indicator light will blink. Remove some devices to
